top of page

Hazards Associated with Stepladders, Trestles, And Staging

Updated: Apr 25, 2023

Stepladder inspections with SM Safety Training

Stepladders, Trestles, And Staging

Many of the points discussed for ladders apply to stepladders and trestles, where stability and overreaching are the main hazards.

The supervisor must check all equipment before use to ensure that there are no defects and must be checked weekly by the user(s) whilst in use on-site. If a defect is noted or the equipment is damaged, it must be taken out of use immediately. Competent persons must only carry out any repairs. Supervisors must also check that the equipment is being used correctly and not used where a safer method should be provided.

Where staging, such as a ‘Youngman’s’ staging platform, is being used in roof areas, supervisors must ensure that only experienced operatives are permitted to carry out this work and that all necessary safety harnesses and anchorage points are provided used.

Step ladder inspection with SM Safety Training & Consultancy

Hazards Associated with Stepladders, Trestles, And Staging

The main hazards associated with stepladders, trestles, and staging are:

  • unsuitable base (uneven or loose materials);

  • unsafe and incorrect use of equipment (e.g., the use of staging for barrow ramps).

  • overloading.

  • use of equipment where a safer method should be provided.

  • the overhang of boards or staging at supports (‘trap ends’).

  • use of defective equipment.

Safety Precautions for Stepladders And Trestles

Stepladders and trestles must be:

  • manufactured to a recognized industrial specification.

  • stored and handled with care to prevent damage and deterioration.

  • subject to a program of regular inspection (there should be a marking, coding, or tagging system to confirm that the inspection has taken place);

  • checked by the user before use.

  • taken out of use if damaged – and destroyed or repaired.

  • used on a secure surface and with due regard to ensuring stability at all times.

· Kept away from overhead cables and similar hazards.

The small platform fitted at the top of many stepladders is designed to support tools, paint pots, and other working materials. It should not be used as a workplace unless the stepladder has been constructed with a suitable handhold above the platform. Stepladders must not be used if they are too short for the work being undertaken or if there is not enough space to open them out fully. If, when on a stepladder, two hands need to be free for a brief period of light work (e.g., changing a light bulb), keep two feet on the same step, and the knees and chest supported by the stepladder maintain three points of contact.

Platforms based on trestles should be fully boarded, adequately supported (at least one support for each 1.5 m of the board for standard scaffold boards), and provided with edge protection when there is a risk of falling a distance liable to cause injury.


Step ladder inspection check list

The right way to use a ladder with SM Safety Training

At SM Safety Training & Consultancy we can help you understand all health and safety matters, we can guide you through all processes, please feel free to contact us on 01980 731706 or email on

74 views0 comments


Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page